An automatic concrete feeding mixer is equivalent to a loader, mixer and conveyor. Two workers can complete the whole process of concrete feeding, mixing, transportation and unloading. The output per hour is up to 20 cubic meters, which is suitable for small projects in various regions.
The truck chassis self mixing concrete truck adopts vertical shaft disk type mixer and flat mouth forced mixing. Generally, the mixing volume is less than 4 cubic meters, and the hydraulic motor is used for mixing. If the mixing volume is more than 4 cubic meters, the diesel engine is used for driving. The double reducer type design is adopted at the bottom, which has stronger strength stability and supports forward and reverse rotation.
In general, C25 concrete can be used for rural road construction. However, concrete with higher hardness is required for sections where large vehicles are allowed to pass. The construction thickness of rural roads is basically 20cm, and 0.6m3 of concrete is required to build one meter of roads.
With the upgrading of demand in rural road construction and the impact of the large environment, the small self loading mixer with energy to produce concrete has gradually become the main source of concrete in rural road construction. First of all, it can produce concrete with different hardness according to the required concrete model. When the construction requires concrete with different hardness, it can control the amount of raw materials according to the model. In addition, this small self loading mixer produced by Henan Yuxin machinery applies strong mixing technology to ensure the quality of concrete. Secondly, its economic price is low. If it is used for construction, the price of raw materials can be used for finished concrete.
The automatic feeding forced mixer refers to the four-wheel drive flat mouth concrete mixer, which is mainly used in rural roads, roads, building reconstruction, field electric pile pouring, and high-standard irrigation and water conservancy concrete ditch pouring. The main feature is that the concrete is mixed while moving. A four-wheel drive vehicle chassis drives the disk type flat mouth forced concrete mixer. The purpose of efficient and continuous construction can be achieved through two rotations. The forced mixer truck is also called a snail truck and an olive truck. In the construction of roads, bridges, roads and other projects, it is necessary to use the concrete mixer truck. The concrete mixer truck can transport the construction concrete to the construction site. The mixer truck is equipped with a mixing drum. During the transportation process of the mixer truck, the mixing drum on the truck will always keep rotating to ensure that the transported concrete will not solidify. After the concrete is transported, the interior of the mixing drum is usually washed with water to prevent the hardened concrete from occupying the space of the mixing drum and reducing the volume of the mixing drum.
The crawler type self mixing concrete truck can mix the dry and hard concrete with high viscosity and less slump and water evenly. The hydraulic motor drive supports the forward and reverse rotation, the mixing force is stable, the long-term mixing failure rate is low, and the construction efficiency is more guaranteed. The long-distance transportation is carried out while stirring. The concrete field construction is carried out with one machine in hand, and the construction is ready to go.
The above is the detailed introduction of the self loading concrete mixing tank truck. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.m8979.com/