1. Gearing and starting: For the gearbox with high and low speed control, the transmission ratio of low gear is relatively large, so we can use third gear or fourth gear when starting on the flat ground when the vehicle is empty. If it is heavy or starting on a slope, we must use second gear. When the vehicle starts ignition, step on the clutch and gently tap the accelerator. Check the tachometer to about 2000 rpm, release the clutch, release the handbrake, and the vehicle starts. Shift into gear 2, pull back to neutral on the left side, and then pull back.
2. Multi function agitator truck shifting: remember the principle of accelerating first when shifting gears and decelerating first when shifting gears. Push the accelerator to raise the speed before shifting up, and pull the accelerator to lower the speed before shifting down. When shifting gears, try to use the two foot separation method. When shifting gears, follow the principle of stepping on (clutch), off (neutral), stepping on (clutch), and engaging (high gear). Quickly step on the two foot clutch pedal to easily increase gears.
3. High speed gear shifting of multi-function mixer: generally, 1-3-5 upshift mode is adopted when driving on the highway, starting at low speed first, and then shifting at high speed. For example, when starting at low speed and third gear, step on the accelerator, pull the accelerator back to neutral, shift to high speed, and directly shift to fifth gear. When the vehicle speed increases, shift directly to 7th gear. When the car is in third gear, the speed is usually between 25-40 mph. If you are a beginner, it is recommended to speed up step by step and form a good habit.
4. Shifting uphill and downhill: shift into the low gear in advance when going uphill, try not to shift on the slope, and it is prohibited to change between high and low speeds in the middle of the slope; When going downhill, it is prohibited to slide in neutral gear and change high and low speeds; Do not shift into low gear when the speed is higher than 30km/h, etc.
The above is a detailed introduction to the automatic concrete mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.m8979.com/